Balford Blog

Zhejiang Balford Mechatronics Co., ltd focus on difficult stamping & deep drawing. Main product: motor housing and difficult custom deep drawn stampings.

What should be paid attention to in the production of precision stamping parts

By : Categories : Blog,Industry Comment: Comments Off on What should be paid attention to in the production of precision stamping parts

With the improvement of science and technology, people have higher and higher requirements for the precision of products. The stamping industry is no exception. While the demand of customers for precision stamping parts is growing, the precision requirements for products are also increasing. In the production process, the production of precision stamping parts should not only consider the shape and size of the product, but also consider the impact of stamping dies, punches and other matters. In order to ensure the production of qualified precision stamping parts, Balford Precision has summarized the following points needing attention after years of production experience and shared them with everyone:

  1. It is necessary to regularly check the performance of the punch and the parallelism and perpendicularity of the workbench.
  2. The production of precision stamping die shall be strictly controlled. If the stamping factory does not have the ability to independently develop the mold, it needs the support of a stronger mold supplier. The quality of precision stamping die determines the quality of precision stamping parts. Therefore, we need to ensure that there are no mistakes in the mold, otherwise the consequences will be unimaginable.
  3. Before installing the mold, be sure to strictly check whether the mold and the press are clean, and check the lubrication of the mold guide post.
  4. During the production process, the springs should be checked and replaced regularly to avoid problems with the springs and affecting the quality of precision stamping parts.
  5. The stamping factory needs to formulate work standards to ensure that the stamping workers operate according to the standards when installing the stamping die.
  6. In the actual production process, if the die edge is worn, it needs to be repaired or replaced in time, otherwise the die will be more damaged.

In addition to the same preventive measures as conventional stamping parts, the main purpose of ensuring the product quality of precision stamping parts is to pay attention to the maintenance and care of the punch and stamping die. Only under the condition of ensuring the accuracy of the punch and die can the stamping factory produce qualified precision stamping parts.

About deep drawing

deep drawing, deep drawing parts, metal deep drawing, metal stamping, metal pressing, metal punching