stamping

Zhejiang Balford Mechatronics Co., ltd focus on difficult stamping & deep drawing. Main product: motor housing and difficult custom deep drawn stampings.

  • Automotive thermostat valve body stainless steel continuous porous stamping

    By : Categories : deep drawing,deep drawn stainless steel,stamping Comment: Comments Off on Automotive thermostat valve body stainless steel continuous porous stamping

    Automotive thermostat valve body stainless steel continuous porous stamping

    1. Manufacturing process: stainless steel coil, punching, turning, pressing steps, punching, trimming

    2. Application range: Automotive thermostat, thermostat valve seat fixing stainless steel stamping parts

    3. Stamping material: stainless steel 304

    4. Surface treatment: stainless steel brightener

    5. Dimensions: Outer diameter is 27.5, inner diameter is 16.62, and height is 5.88. In addition, the dimensions can be customized according to your company’s requirements. The unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Thermostat valve seat stainless steel stamping parts

    By : Categories : deep drawing,stamping Comment: Comments Off on Thermostat valve seat stainless steel stamping parts

    Thermostat valve seat stainless steel stamping parts

    1. Manufacturing process: stainless steel coil, punching, turning, pressing steps, punching, trimming

    2. Application range: Automotive thermostat, thermostat valve seat fixing stainless steel stamping parts

    3. Stamping material: stainless steel 304

    4. Surface treatment: stainless steel brightener

    5. Dimensions: Outer diameter 27.5, inner diameter 13.6, height 5.72, in addition, the dimensions can be customized according to your company’s requirements, and the unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Processing of stainless steel stamping parts of engine thermostat bypass valve

    By : Categories : deep drawing,deep drawn stainless steel,stamping Comment: Comments Off on Processing of stainless steel stamping parts of engine thermostat bypass valve

    Processing of stainless steel stamping parts of engine thermostat bypass valve

    1. Manufacturing process: stainless steel coil, shallow drawing, drilling and turning, trimming

    2. Application range: automotive engine thermostat, thermostat bypass valve, stainless steel stamping parts

    3. Stamping material: stainless steel 304

    4. Surface treatment: stainless steel brightener

    5. Dimensions: The outer diameter of the flange is 23.21, the inner diameter is 18.49, and the height is 3.49. In addition, the dimensions can be customized according to your company’s requirements. The unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship

    All are devoted to the pursuit of quality by Balford people.

    Read More →
  • Automotive precision tube starter motor housing

    By : Categories : deep drawn stainless steel,stamping Comment: Comments Off on Automotive precision tube starter motor housing

    Automotive precision tube starter motor housing

    1. Manufacturing process: 6 meters of precision steel pipe, rotary cutting or laser cutting, flat head chamfering, flushing all gaps at one time, plastic spraying

    2. Application range: Ford car starter motor, starter motor, starter motor, starter motor housing

    3. Stamping material: No. 10 / No. 20 precision steel pipe

    4. Surface treatment: spray plastic, but there is a place that needs to be shielded and sprayed.

    5. Dimensions: The outer diameter is 74, the wall thickness is 2.5, and the height is 70. In addition, the dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Ford starter motor steel tube housing

    By : Categories : deep drawn stainless steel,stamping Comment: Comments Off on Ford starter motor steel tube housing

    Ford starter motor steel tube housing

    1. Manufacturing process: 6 meters of precision steel pipe, rotary cutting or laser cutting, flat head chamfering, flushing all gaps at one time, plastic spraying

    2. Application range: Ford car starter motor, starter motor, starter motor, starter motor housing

    3. Stamping material: No. 10 / No. 20 precision steel pipe

    4. Surface treatment: electrophoresis, but there is a place where electrophoresis needs to be shielded.

    5. Dimensions: The outer diameter is 74, the wall thickness is 2.5, and the height is 88. In addition, the dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Exhaust gas recirculation valve bracket

    By : Categories : deep drawing,deep drawn stainless steel,stamping Comment: Comments Off on Exhaust gas recirculation valve bracket

    Exhaust gas recirculation valve bracket 1. Manufacturing process: stainless steel coil, deep drawing, deep drawing, redrawing, flat head chamfering 2. Scope of application: exhaust gas circulation valve bracket, bellows frame 3. stamping material: stainless steel 304 4. Surface treatment: stainless steel brightener 5. Dimensions: Outer diameter is 46.8, inner diameter is 40.7, and height is […]

    Read More →
  • Stainless steel hoop fixed pipe clamp

    By : Categories : deep drawing,deep drawn stainless steel,stamping Comment: Comments Off on Stainless steel hoop fixed pipe clamp

    Stainless steel hoop fixed pipe clamp

    1. Manufacturing process: stainless steel coil, stamping and forming, punching

    2. Scope of application: Motor shell hoop

    3. Stamping material: stainless steel 301s

    4. Surface treatment: stainless steel brightener

    5. Size specifications: The size can be customized according to your company’s requirements, and the unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Furniture and equipment connection corner code

    By : Categories : deep drawn low carbon steel,stamping Comment: Comments Off on Furniture and equipment connection corner code

    Fixed piece furniture equipment connection angle code

    1. Manufacturing process: cold-rolled sheet coil, stamping

    2. Scope of application: Mounting brackets and fixing pieces are used on home appliances and furniture.

    3. Stamping material: cold rolled sheet 1.5mm

    4. Surface treatment: nickel plating

    5. Size specifications: 41*91*1.1, other sizes can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: there is no burr on the end face, the cut surface is parallel and vertical, and the appearance is bright

    7. Quality: The production quality is strictly controlled, and the products are fully inspected before they are shipped. The products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Fixed iron bracket mounting bracket

    By : Categories : deep drawn stainless steel,stamping Comment: Comments Off on Fixed iron bracket mounting bracket

    Fixed iron bracket mounting bracket

    1. Manufacturing process: cold-rolled sheet coil, stamping

    2. Scope of application: Mounting brackets and fixing pieces are used on home appliances and furniture.

    3. Stamping material: cold rolled sheet 1.5mm

    4. Surface treatment: nickel plating

    5. Size specifications: 50*118*1.1, other sizes can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: there is no burr on the end face, the cut surface is parallel and vertical, and the appearance is bright

    7. Quality: The production quality is strictly controlled, and the products are fully inspected before they are shipped. The products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • The inner supporting iron shell of the miniature current transformer

    By : Categories : deep drawn stainless steel,stamping Comment: Comments Off on The inner supporting iron shell of the miniature current transformer

    The inner supporting iron shell of the miniature current transformer

    1. Manufacturing process: silicon steel sheet coil, blanking, bending

    2. Scope of application: Support iron shell in plastic shell of miniature current transformer

    3. Stamping material: silicon steel sheet 800

    4. Surface treatment: stainless steel brightener

    5. Dimensions: Outer diameter 29.5*26.5*28, wall thickness 0.5mm, other dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: slight burrs on the end face, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Solenoid valve bracket

    By : Categories : deep drawn low carbon steel,stamping Comment: Comments Off on Solenoid valve bracket

    Solenoid valve bracket

    1. Manufacturing process: cold-rolled sheet coil, punching, punching, bending and forming, tapping

    2. Scope of application: solenoid valve bracket, solenoid valve mounting bracket

    3. Stamping material: cold rolled sheet 1.5mm

    4. Surface treatment: galvanized

    5. Size specifications: The outer diameter is 24*26*38. In addition, the size can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • Nitrogen oxygen sensor protective cover Nitrogen oxygen sensor exhaust pipe Jiefang urea sensor protective shell

    By : Categories : deep drawn low carbon steel,stamping Comment: Comments Off on Nitrogen oxygen sensor protective cover Nitrogen oxygen sensor exhaust pipe Jiefang urea sensor protective shell

    Nitrogen oxygen sensor protective cover Nitrogen oxygen sensor exhaust pipe Jiefang urea sensor protective shell

    1. Manufacturing process: cold-rolled sheet blanking, bending, punching, galvanizing

    2. Scope of application: Jiefang urea accessories, nitrogen and oxygen sensor protective shell

    3. Stamping material: cold rolled sheet

    4. Surface treatment: galvanized

    5. Size specifications: The size can be customized according to your company’s requirements, and the unit price is negotiable.

    6. Product features: there is no burr on the end face, the cut surface is parallel and vertical, and the appearance is bright

    7. Quality: The production quality is strictly controlled, and the products are fully inspected before they are shipped. The products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details. In order to let you buy better products, we strive to improve every detail. From accessories to craftsmanship, we are devoted to the pursuit of quality by Balford people.

    Read More →
  • Stamped mounting plate with countersunk head cover

    By : Categories : deep drawn aluminum,stamping Comment: Comments Off on Stamped mounting plate with countersunk head cover

    Stamped mounting plate with countersunk head cover

    1. Manufacturing process: aluminum coil, punching and blanking, countersunk, leveling and deburring

    2. Scope of application: Diaphragm vacuum pump

    3. Stamping material: aluminum plate 5052

    4. Surface treatment: plastic spray

    5. Dimensions: Outer diameter 109*216, height 3, other dimensions can be customized according to your company’s requirements, the unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: The production quality is strictly controlled, and the products are fully inspected before they are shipped. The products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • IGBT module copper base plate

    By : Categories : deep drawn copper,fine blanking,stamping Comment: Comments Off on IGBT module copper base plate

    Photovoltaic power semiconductor igbt module copper base plate

    1. Manufacturing process: t2y2 copper, blanking, fine blanking

    2. Scope of application: new energy electric vehicles, photovoltaic power semiconductor igbt module copper base plate

    3. Stamping material: t2y2 copper, Vickers hardness 80-100

    4. Surface treatment: nickel sulfamate plating

    5. Dimensions: Width 58.5, Material Thickness 3, Length 104.5, and other dimensions can be customized according to your company’s requirements, and the unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →
  • New energy power battery pole, friction welding pole

    By : Categories : stamping Comment: Comments Off on New energy power battery pole, friction welding pole

    New energy power battery pole, friction welding pole

    1. Manufacturing process: copper-aluminum composite, stamping processing

    2. Scope of application: New energy copper-aluminum composite battery negative pole, power battery top cover pole can be customized

    3. Stamping material: copper-aluminum composite

    4. Surface treatment: stainless steel brightener

    5. Dimensions: Outer diameter 22, height 3.8, and other dimensions can be customized according to your company’s requirements, and the unit price is negotiable with our company.

    6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

    7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

    Quality comes from details, confidence comes from customers’ evaluation of our evaluation, in order to let you buy better products , strive to perfect every detail, from accessories to craftsmanship, are devoted to the pursuit of quality by Balford people.

    Read More →