Balford Blog

Zhejiang Balford Mechatronics Co., ltd focus on difficult stamping & deep drawing. Main product: motor housing and difficult custom deep drawn stampings.

Metal Stamping Prevent Hidden Dangers

By : Categories : Blog,Industry Comment: Comments Off on Metal Stamping Prevent Hidden Dangers

Metal stamping is dangerous, but it is not really dangerous. It complies with the stamping system and operates properly. Stamping is still very safe. During the Metal Stamping process, for safety reasons, pay attention to the adjustment screw of the slider, and do not let it extend too long. In the Metal Stamping process, in order to prevent the mold from moving, a layer of paper can be applied to the reinforcement, and the Stamping Mould is a dangerous situation. For the safety of metal stamping parts processing, disassemble the mold and wait until the machine is completely stopped. Metal Stamping processing, if you need to adjust and install the mold, you must first turn off the power into action. Although this can be done without turning off the power, the risk index will be greatly increased, so in order to be safe, the power must be completely turned off. Operate after stopping operation. In Metal Stamping processing, the presence of fastening screws will guarantee the safety of metal stamping parts processing. In order to ensure that this protection is not a hidden danger, it is necessary to tighten the fastening screws frequently to ensure that the fastening screws can have safety features.

About deep drawing

deep drawing, deep drawing parts, metal deep drawing, metal stamping, metal pressing, metal punching