Chevrolet Cruze Yinglang Angkola water temperature sensor shell water temperature sensor plug cover water temperature plug shell

Chevrolet Cruze Yinglang Angkola water temperature sensor shell water temperature sensor plug cover water temperature plug shell

1. Manufacturing process: Brass coil, deep drawing, deep drawing, redrawing, reshaping, flat head chamfering

2. Scope of application: Chevrolet Cruze, Yinglang Angola, Jiefang, Xichai, Yuchai, Weichai, water temperature sensor, water temperature sensor, copper shell, outer cover, universal

3. Stamping material: brass h63

4. Surface treatment: special degreaser for copper, special brightener for copper, special color retention agent for copper

5. Dimensions: Outer diameter 18, inner diameter 17.15, height 30, other dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

Quality comes from details. In order to let you buy better products, we strive to improve every detail. From accessories to craftsmanship, we are devoted to the pursuit of quality by Balford people.

Peugeot Citroen cooling water temperature sensor housing

Peugeot Citroen Cooling Water Temperature Sensor Copper Deep Drawing Housing

1. Manufacturing process: Brass coil, deep drawing, deep drawing, redrawing, reshaping, flat head chamfering

2. Scope of application: Peugeot Citroen Wuling Automobile, Sinotruk, Jiefang Xichai Yuchai Weichai water temperature sensor copper shell deep drawing shell cover general

3. Stamping material: brass h63

4. Surface treatment: special degreaser for copper, special brightener for copper, special color retention agent for copper

5. Dimensions: Outer diameter 25.4, inner diameter 24.5, height 27.2, in addition, the dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

7. Quality: Strictly control the production quality, the products are fully inspected before they are shipped, and the products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

Quality comes from details. In order to let you buy better products, we strive to improve every detail. From accessories to craftsmanship, we are devoted to the pursuit of quality by Balford people.

car gas generator cover

          ♦ Product Name: Car Gas Generator Cover

          ♦ Applicable models: Renault, Manca TGA all models

          ♦ Product OEM:

Car Airbag Gas Generator Housing, Gas Generator Housing, Airbag Generator Housing, Electric Vehicle Airbag Gas Generator Housing, Main Cab Propulsion Housing

Zhejiang Balford Electromechanical Co., Ltd. specializes in difficult stamping and deep drawing technology. The main products are DC motor casing, motor cover, motor casing, motor end cover, motor casing, metal ring, bracket, metal box, square can, square box, solenoid valve casing, heating plate, sensor casing, filter casing, Resonator housings and highly difficult custom deep-drawn products. Zhejiang Balford Electromechanical Co., Ltd. provides customized and standard zero-type deep-drawn metal parts, metal boxes, metal cylinders, metal cups, metal lids, metal cans, instrument housings and connector. Zhejiang Baifudu Electromechanical Co., Ltd. is able to offer low prices for custom metal stampings because we purchase our raw materials directly from the factory – eliminating middlemen.

We provide cost-driven solutions for your custom stainless steel stamping applications. Our commitment to the advantages and extensive expertise of metal stamping operations provides the greatest cost savings for you, our customers.  

Zhejiang Balford Electromechanical Co., Ltd. Stamping provides the most cost-effective pricing for your custom metal stamping requirements.

Flange drawing parts, deep drawing parts, fine blanking parts, stamping and bending parts, precision shaped metal stamping parts, deep drawing metal parts, deep drawing, deep drawing and metalworking, deep-drawn bottle precision drawn and stamped metal parts, deep-drawn parts, deep-drawn metal casings and casings, deep-drawn casings, continuous die drawn parts, transfer die drawn parts, deep drawing forming, progressive die stampings , Can, Barrel, Barrel, Cup, Lid, Case, Ring, Box, Cylinder, Customized Shrapnel, Components, Connectors, Deep Drawing, Couplings, Angles, Housings, Eyelets, Ferrules, Accessories , housings, sensors, housings, sleeves, tubes, deep drawn metal cylinders, housings, tanks, hollow metal parts, seamless metal parts, hydroforming, deep drawn tanks, mechanical parts, progressive die stamping, engineered parts, custom Sheet metal parts, stamping, brazing, vibration deburring, zinc plating, chrome plating, nickel plating, tin plating, silver plating, anodizing, oxidation, powder coating, galvanizing, hot-dip galvanizing, electropolishing, phosphating, passivation Chemical, Silk Screen, Polished, Sandblasted, Heat Treated, Brushed, Light Oil, Conversion Coating, Hard Anodized, Hard Anodized, Brushed, Threaded, Ball, Side Notch, Reverse Draw, Side Pierced, Necked , Bulge, Bracket, Nut, Riveting, Countersinking, Reaming, Pressed Aluminum 5052, 2014, 3003, 6061, 2014-T6, Cold Rolled Steel (CRS) 1008, 1010, 1050, Spring Steel Mild Steel, Hot Rolled steel SPHC, SPHD, Q195, 235, 345, high strength low alloy steel (HSLA) grades 50, 60, 70 and 80, galvanized steel, stainless steel AiSi304, 303, 316, 316L, 430, 321, etc.

At Zhejiang Baifudu Electromechanical Co., Ltd., maintaining tight tolerances during the manufacturing of stamped motor housing parts is a direct result of our close attention to quality control. In fact, for the value that T.I.R. controls the perpendicularity of our motor housing to its mounting and assembly flanges, Zhejiang Baifudu Electromechanical Co., Ltd. is able to manufacture stamped motor housings with concentricity between 0.01-0.1 mm. This focus on tight tolerances also includes bearings. By keeping the overall diameter tolerance of the bearing grooves to 0.01mm, Zhejiang Baifudu Electromechanical Co., Ltd. is able to minimize bearing wear, thereby extending bearing life.

What should we pay attention to when processing aluminum plate?

1. The punching holes should be arranged behind the items without affecting the number of items. Even if it is a product with a large number of punching holes, you can consider doing one more project, and the punching holes should be ranked at the back.

2. The material of the aluminum plate is soft, and the mold is more likely to block the material. Therefore, when designing the mold gap, it is advisable to put a gap of 10% of the thickness of the material on both sides.

3. When bending and forming, because the aluminum plate is prone to produce aluminum scraps during bending, it will form point damage and indentation. The raw material of the aluminum plate needs to be covered with PE film. The shaped blocks are preferably polished and hard chrome plated in the roller and galvanized condition.

4. For the stamping parts that need to be processed after the anode, if the flattening and flattening process is 180°, the product cannot be completely pressed, and the phenomenon of acid spitting will occur when it is completely pressed. The liquid can flow out smoothly and in time, so in this process, a limit block needs to be made to calibrate the mold to a position higher than the mold.

5. Because the aluminum plate is relatively brittle and easy to crack, especially in the case of reverse folding, try not to make a crimping line, even if you do, make the crimping line wider and shallower.

6. All aluminum plate parts are required to be cut with slow-moving wire to prevent burrs and unsmooth blanking. Aluminum plate parts are prone to high temperature, so the hardness of the punch should be above 60°, at least with SKD11 material or above, and there should be no D2 poor punch.

The aluminum plate is relatively soft, so it is easy to cause top injury, crush injury, scratch and deformation during the stamping production process. In addition to the requirements for the mold, the following points must be done in the stamping production process:

(1) In order to stamp the aluminum plate parts well and reduce the defect rate, we must first do 5S, especially cleaning, including molds, punching table, assembly line, packaging materials, etc. There must be no sharp debris, and no dirt must be cleaned regularly. . The top and bottom of the mold must be clean and free of debris.

(2) If it is found that the product has large burrs, it must be sent to the mold for repair in time, and follow up to the result.

(3) The aluminum plate parts are more likely to heat up and become hard when they are stacked together. Therefore, when punching and blanking, it is necessary to apply some pressing oil on the material before punching (which can not only dissipate heat but also smooth the blanking).

(4) For products with more punching holes, the appearance of the mold should be punched and cleaned, so that the mold and the product are always clean and free of debris and reduce top damage. If top damage is found, it is necessary to find the top damage of the mold. Problems must be dealt with in order to continue production.

(5) Aluminum scraps will be generated when the mold push block is leveled, so after the push block is used up every day, the aluminum scrap on the push block must be cleaned up.

What are the common problems in sheet metal stamping processing?

Sheet metal processing parts have the characteristics of light weight, high strength, electrical conductivity (can be used for electromagnetic shielding), low cost, and good mass production performance. Widely used in electronic appliances, communications, automotive industry, medical equipment and other fields. With the increasing application of sheet metal parts, the design of sheet metal parts has become a very important part of the product development process. Mechanical engineers need to understand the design skills of sheet metal parts, so that the designed sheet metal parts can not only meet the requirements of product function and appearance, but also make the manufacture of stamping dies simple and low cost.

1. Common problems of stamping parts processing in sheet metal processing

1. Burrs: In the process of stamping or chamfering, the excess material is not completely left, and burrs appear under the section of the steel plate. According to the interface, when the burr height is greater than 0.2mm, the iron powder will damage the mold, causing convex and concave.

2. Unevenness: The surface of the material is abnormally convex and concave, which is caused by the uncoiled line. This is due to foreign objects (iron filings and dust) in 3.

3, caused by mixing. Roll marks: Caused by foreign matter adhering to the cleaning roller or feed roller (fixed spacing). Generally speaking, foreign objects printed on paper can be cleaned.

4. Scratches: Due to the rollers. Scratches may appear when the roller suddenly stops or accelerates.

5. Rolling may cause wrinkling at the edges: the guide rollers on the uncoiler line may cause wrinkling due to the small gap between the guide rollers on the die, which is caused by the unbalanced feeding of the rollers.

6. Scratches: The main reason for parts being scratched is that there are sharp scars on the mold or metal dust falls into the mold. Precautions are sanding mold marks and cleaning metal dust.

7. Bottom crack: The main reason for the bottom crack of the part is the poor plasticity of the material or the pressure of the die blank holder is too tight. The preventive measure is to replace the plastic material or loosen the edge holder.

8. Wrinkling of the side wall: The main reason for the wrinkling of the side wall of the part is that the material thickness is not enough when the upper and lower molds are installed (if it is relatively small, the thickness is allowed to be thinner) or deviation. This results in a larger gap on one side and a smaller gap on the other. The caveat is to immediately replace the material and readjust the mold.

Car airbag inflator housing

♦ Product Name: Car Airbag Gas Generator Shell

♦ Applicable models: Renault, Manka, Toyota, Honda, Mercedes-Benz, BMW, Volkswagen, Ford, new energy electric vehicles

♦ Product OEM:

Gas generator casing, airbag generator casing, stainless steel deep drawing, automobile airbag gas generator casing

Zhejiang Balford Electromechanical Co., Ltd. focuses on difficult stamping and deep drawing technology. The main products are DC motor casing, motor cover, motor casing, motor end cover, motor casing, metal ring, bracket, metal box, square can, square box, solenoid valve casing, heating plate, sensor casing, filter casing, Resonator housings and highly difficult custom deep-drawn products. Zhejiang Baifudu Electromechanical Co., Ltd. provides customized and standard zero-type deep-drawn metal parts, metal boxes, metal cylinders, metal cups, metal lids, metal cans, instrument housings and connector. Zhejiang Baifudu Electromechanical Co., Ltd. is able to offer low prices for custom metal stampings because we purchase our raw materials directly from the factory – eliminating middlemen.

We provide cost-driven solutions for your custom stainless steel stamping applications. Our commitment to the advantages and extensive expertise of metal stamping operations provides the greatest cost savings for you, our customers.

Zhejiang Balford Electromechanical Co., Ltd. Stamping provides the most cost-effective pricing for your custom metal stamping requirements.

Flange drawing parts, deep drawing parts, fine blanking parts, stamping and bending parts, precision shaped metal stamping parts, deep drawing metal parts, deep drawing, deep drawing and metal working, deep drawing bottle precision stamping and stamping metal parts , deep-drawn parts, deep-drawn metal casings and casings, deep-drawn casings, continuous die-drawn parts, transfer-die-drawn parts, deep-drawn forming, progressive die-stamping parts, can, barrel, barrel, cup, Covers, Enclosures, Rings, Boxes, Cylinders, Custom Shrapnel, Components, Connectors, Deep Drawing, Couplings, Angle Codes, Housings, Eyelets, Ferrules, Fittings, Housings, Sensors, Housings, Sleeves, Tubes, Deep Drawn Metal Cylinders, Housings, Cans, Hollow Metal Parts, Seamless Metal Parts, Hydroforming, Deep Drawn Cans, Machine Parts, Progressive Die Stamping, Engineered Parts, Custom Sheet Metal Parts, Stamping, Brazing, Vibration Deburring, Plating Zinc, Chrome, Nickel, Tin, Silver, Anodizing, Oxidation, Powder Coating, Galvanizing, Hot Dip Galvanizing, Electropolishing, Phosphating, Passivation, Screen Printing, Polishing, Sandblasting, Heat Treating, Brushing, Light Oil, Conversion Coating, Hard Anodizing, Hard Anodizing, Brushing, Threading, Ball, Side Notching, Reverse Drawing, Side Piercing, Neck, Bulge, Bracket, Nut, Riveting, Countersinking, Reamed, Laminated Aluminum 5052, 2014, 3003, 6061, 2014-T6, Cold Rolled Steel (CRS) 1008, 1010, 1050, Spring Steel Mild Steel, Hot Rolled Steel SPHC, SPHD, Q195, 235, 345, High Strength Low Alloy steel (HSLA) grades 50, 60, 70 and 80, galvanized steel, stainless steel AiSi304, 303, 316, 316L, 430, 321, etc.

At Zhejiang BalfordElectromechanical Co., Ltd., maintaining tight tolerances during the manufacturing of stamped motor housing parts is a direct result of our close attention to quality control. In fact, for the value that T.I.R. controls the perpendicularity of our motor housing to its mounting and assembly flanges, Zhejiang Baifudu Electromechanical Co., Ltd. is able to manufacture stamped motor housings with concentricity between 0.01-0.1 mm. This focus on tight tolerances also includes bearings. By keeping the overall diameter tolerance of the bearing grooves to 0.01 mm, Zhejiang Baifudu Electromechanical Co., Ltd. is able to minimize bearing wear, thereby extending bearing life.

renault nissan water temperature sensor housing

renault nissan water temperature sensor housing 1. Manufacturing process: Brass coil, deep drawing, deep drawing, redrawing, reshaping, flat head chamfering 2. Scope of application: Renault-Nissan, Sinotruk, Jiefang, Xichai, Yuchai, Weichai water temperature sensor, copper shell, outer cover, universal 3. stamping material: brass h63 4. Surface treatment: special degreaser for copper, special brightener for copper, special […]

Mini Peugeot Car Sensor Housing Rover Water Temperature Sensor Housing

Mini Peugeot Car Sensor Housing Rover Water Temperature Sensor Housing
1. Manufacturing process: Brass coil, deep drawing, deep drawing, redrawing, reshaping, flat head chamfering

2. Scope of application: Mini BMW, Peugeot, Wuling, Cummins, Xichai, Yuchai, Weichai water temperature sensor copper shell cover

3. Stamping material: brass h63

4. Surface treatment: special degreaser for copper, special brightener for copper, special color retention agent for copper

5. Dimensions: Outer diameter 25.5, inner diameter 24.4, height 27.3, in addition, the dimensions can be customized according to your company’s requirements, and the unit price is negotiable.

6. Product features: no burrs on the end face, flat head chamfering, parallel and vertical cut surfaces, bright appearance

7. Quality: The production quality is strictly controlled, and the products are fully inspected before they are shipped. The products must be inspected before leaving the factory to ensure that every process meets the requirements and quality problems.

Quality comes from details. In order to let you buy better products, we strive to improve every detail. From accessories to craftsmanship, we are devoted to the pursuit of quality by Balford people.

Gas generator stainless steel deep drawn housing

♦ Product name: Stainless steel deep-drawn casing for automobile airbag inflator Gas Generator Housing, Airbag Generator Housing, Stainless Steel deep drawing Housing Zhejiang Baifudu Electromechanical Co., Ltd. focuses on difficult stamping and deep drawing technology. The main products are DC motor casing, motor cover, motor casing, motor end cover, motor casing, metal ring, bracket, metal […]

BMW Servo Motor Housing Eccentric Shaft Adjuster Cylinder Head Motor Housing

BMW Servo motor housing Eccentric Shaft Adjuster Cylinder Head motor housing Manufacturing process: cold-rolled sheet coil, forced thinning and deep drawing, deep drawing, redrawing, extruding steps, flat head chamfering Application range: BMW E60 F10 E65 F01 E90 E70 X5 Z4, BMW mini servo motor housing stamping material: cold-rolled sheet 3.0 forced thinning and deep drawing […]

Solenoid valve washer

Solenoid valve washer Benefits Attributes aluminum stamping, aluminum punching parts Company Information China Balford Mechatronics Co.,Ltd. focused on difficult stamping and deep-drawn technologies. The main products are DC motor housings, motor covers,motor shells, motor lids, motor cases, metal rings, bracket, metal box, motor cans, stampings, punchings, pressings and difficulty custom deep drawn stamping products.China Balford Manufacturing services food, aviation, medical, automotive, electronics, aerospace […]

auto valvetronic eccentric shaft actuator motor housing

Eccentric Shaft actuator motor housing shaft-actuator-housing Benefits Attributes Valvetronic Camshaft adjuster For BMW servo motor housing A2C53122965, 11377509295 AUTO vvt VALVETRONIC servo motor housing, ECCENTRIC SHAFT ACTUATOR motor housing FOR BMW E81 E82 11377548387 A2C53123520 Company Information China Balford Mechatronics Co.,Ltd. focused on difficult stamping and deep-drawn technologies. The main products are DC motor housings, motor covers,motor shells, motor […]

volute casing

volute casing Benefits Attributes Our core competence lie sin the production of industrial pumps for the chemical, pharmaceutical, food, medical or chiller sectors. Material: 1.4571 2B (cold rolled) Inner area: Does not need to get polished if the Ra from the metal sheet has the necessary surface roughness The sheet thickness has no influence for […]

Sleeves Bushes Washers

Sleeves Bushes Washers Benefits Attributes stainless steel deep drawing Sleeve Bushing Washer Company Information China Balford Mechatronics Co.,Ltd. focused on difficult stamping and deep-drawn technologies. The main products are DC motor housings, motor covers,motor shells, motor lids, motor cases, metal rings, bracket, metal box, motor cans, stampings, punchings, pressings and difficulty custom deep drawn stamping products. China Balford Manufacturing services food, aviation, […]

back bottom plate

back bottom plate Benefits Attributes steel plate, HRCQ flanging hole, blanking, machining, punching Company Information China Balford Mechatronics Co.,Ltd. focused on difficult stamping and deep-drawn technologies. The main products are DC motor housings, motor covers,motor shells, motor lids, motor cases, metal rings, bracket, metal box, motor cans, stampings, punchings, pressings and difficulty custom deep drawn stamping products. China Balford Manufacturing services food, […]