Balford Blog

Zhejiang Balford Mechatronics Co., ltd focus on difficult stamping & deep drawing. Main product: motor housing and difficult custom deep drawn stampings.

The Deep Drawn Stamping

By : Categories : Blog,Industry Comment: Comments Off on The Deep Drawn Stamping

Although it can be modified to make specific parts, our deep drawing stamping process typically follows the same five steps:1.Design Review:Our engineers review the part design in detail to ensure it is suitable for deep drawing stamping. This includes in-depth analysis of component dimensions, materials, draw ratio, and required tolerances.

2.Press Selection: Our engineers determine which machine size and caliber will best suit the size and material of the part.

3.Virtual 3D prototyping: A prototype of the part is created using virtual software. The prototype is run through numerous operational simulations to catch any design problems before the production process begins.

4.Equipment setup: Our skilled engineers review component dimensions and requirements and set die and punch.

5.Deep Draw Process: The sheet metal, or metal blank, is placed on the die and secured. The press is then activated to force the punch against the die with up to 400 tons of force. The process is repeated until the component reaches the desired size and shape.

About deep drawing

deep drawing, deep drawing parts, metal deep drawing, metal stamping, metal pressing, metal punching